Note:The WHR2-G54 model is functionally similar, but is missing the AOSS button on the case.
LAN = br0 = eth0 eth2 WAN = eth1 Wifi = eth2
CPU revision is: 00029006 Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes. Primary data cache 16kB, 2-way, linesize 16 bytes. Linux version 2.4.30 (nbd@ux-2y02) (gcc version 3.4.4 (OpenWrt-1.0)) #1 Sun Mar 26 19:02:04 CEST 2006 Setting the PFC value as 0x15 Determined physical RAM map: memory: 04000000 @ 00000000 (usable) On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200 CPU: BCM4704 rev 8 at 264 MHz Using 132.000 MHz high precision timer. Calibrating delay loop... 263.78 BogoMIPS Memory: 62892k/65536k available (1412k kernel code, 2644k reserved, 100k data, 80k init, 0k highmem) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) Checking for 'wait' instruction... unavailable. POSIX conformance testing by UNIFIX PCI: Fixing up bus 0 PCI: Fixing up bridge PCI: Setting latency timer of device 01:00.0 to 64 PCI: Fixing up bus 1 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled ttyS00 at 0xb8000300 (irq = 3) is a 16550A ttyS01 at 0xb8000400 (irq = 0) is a 16550A b44.c:v0.93 (Mar, 2004) PCI: Setting latency timer of device 00:01.0 to 64 eth0: Broadcom 47xx 10/100BaseT Ethernet 00:0d:0b:27:14:36 PCI: Setting latency timer of device 00:02.0 to 64 eth1: Broadcom 47xx 10/100BaseT Ethernet 00:0d:0b:27:14:37 Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0 cfi_cmdset_0001: Erase suspend on write enabled 0: offset=0x0,size=0x2000,blocks=8 1: offset=0x10000,size=0x10000,blocks=63 Using word write method Flash device: 0x400000 at 0x1c000000 Creating 5 MTD partitions on "Physically mapped flash": 0x00000000-0x00040000 : "pmon" 0x00040000-0x003f0000 : "linux" 0x000bc400-0x001b6000 : "rootfs" mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only 0x003f0000-0x00400000 : "nvram" 0x001c0000-0x003f0000 : "OpenWrt" Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) ip_conntrack version 2.1 (5953 buckets, 5953 max) - 328 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: Ethernet Bridge 008 for NET4.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> VFS: Mounted root (squashfs filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 80k freed Algorithmics/MIPS FPU Emulator v1.5 diag boardtype: 0000042f Probing device eth0: No Robo switch in managed mode found Probing device eth1: No Robo switch in managed mode found Probing device eth2: No such device Probing device eth3: No such device BFL_ENETADM not set in boardflags. Use force=1 to ignore. b44: eth0: Link is up at 100 Mbps, full duplex. b44: eth0: Flow control is off for TX and off for RX. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228000: 0x4c46 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228004: 0x0dc0 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228008: 0x0176 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022800c: 0x0062 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228010: 0x0404 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228014: 0x6e69 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228018: 0x656e instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0022801c: 0x7361 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228020: 0x3532 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00228024: 0x3532 instead Further such events for this erase block will not be printed JFFS2: Erase block at 0x00220000 is not formatted. It will be erased jffs2.bbc: SIZE compression mode activated. PCI: Setting latency timer of device 01:02.0 to 64 PCI: Enabling device 01:02.0 (0004 -> 0006) eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.37.0 Probing device eth0: No Robo switch in managed mode found Probing device eth1: No Robo switch in managed mode found Probing device eth2: [switch-robo.c:90] SIOCGETCPHYRD failed! [switch-robo.c:90] SIOCGETCPHYRD failed! No Robo switch in managed mode found Probing device eth3: No such device BFL_ENETADM not set in boardflags. Use force=1 to ignore. device eth0 entered promiscuous mode device eth2 entered promiscuous mode br0: port 2(eth2) entering learning state br0: port 1(eth0) entering learning state br0: port 2(eth2) entering forwarding state br0: topology change detected, propagating br0: port 1(eth0) entering forwarding state br0: topology change detected, propagating CSLIP: code copyright 1989 Regents of the University of California PPP generic driver version 2.4.2 b44: eth1: Link is up at 100 Mbps, full duplex. b44: eth1: Flow control is off for TX and off for RX.